Canopy
MERGE 3-2
Chapter 3
Install:
Connect the front canopy rod and rear canopy rod, and
tighten the connecting slip bolt ③
In the reverse order of the removal procedures.
Tightening torque for ①, ②, ⑤ ：
22N·m (16.2 ft·1b)
Removal of the Pillar
Remove:
1． Fixing bolt of backrest bracket ①
2． Backrest bracket
3． Fixing bolt on the rear pillar ②
4． Fixing bolt on the rear pillar branch ③
5． Rear pillar
6． Rear pillar branch
7． Fixing bolt on the center pillar connector ④（E-4）
8． Center pillar connector
9． Fixing bolt on the center pillar ⑤（E-4）
10. Center pillar
To Next Page
Loading...
