Regular Inspection and Adjustment
MERGE 2-14
Chapter 2
the operation, the quality of fit between half shaft
and bearing or bearing sleeve may deteriorate. In
this case, we usually recommend the replacement of
a new rear axle half shaft assembly.
Inspection of the Shock Damper
1. Inspect:
· For oil leakage
In case of oil leakage, the shock damper is to be
replaced
· Spring
In case of decay, scrape or damage, the shock
damper is to be replaced
Mounting bolts of front shock damper:
Tightening torque
63N·m (46.5ft·1b)
Mounting bolts of the rear shock damper:
Tightening torque
63N·m (46.5ft·1b)
To Next Page
Loading...
