Topcon Net-G3A - Page 143

Index
P/N 7010-0935
Index
See OAF
P
PC-CDU 2-6, 2-24
computer requirements 2-6
configuration 3-3–3-8, 3-10, 3-
15
install 2-6
manage power 2-24
uninstall 2-7
version requirements 2-6
Phase center 3-24
Port
Ethernet 1-15
event 1-15
external frequency 1-15
GPS antenna 1-15
NET-G3 back 1-14
NET-G3 front 1-15
power 1-15
PPS 1-15
serial, back 1-14
serial, front 1-15
Port A 1-14
Power 2-4
on/off 2-13
ports 2-4
switch 2-4
Power button 1-11
Power port 1-15
Power status 2-12
via PC-CDU 2-12, 2-24
PPS port 1-15
PWR LEDs 1-10, 2-12
blink pattern 1-10
R
RAM file 4-21, 4-23
REC LED
and FN button 1-12
blink pattern 1-11, 1-12
Receiver modes 4-19
See also EIM
See also Normal Mode
extended
4-19–4-20
sleep mode 4-21
Recording interval 3-11
Reference station
temporary 3-21
Remove CF card 2-9
RS232 connection parameters 2-22
RTK 1-5
RX TX LED 1-11
S
SD/CF card, install 2-8
Serial number 3-4
Serial port 1-14, 1-15
Serial port A 1-14
Set baud rate, 115200 2-22, 4-22
Sleep mode 4-21
Software 2-5
FLoader 2-7
PC-CDU 2-6, 3-3–3-8, 3-10, 3-
15
Topcon Link 4-7
TopNET 1-9, 2-5, 3-1, 3-2
STAT LED 1-9, 4-19
blink pattern 1-9, 4-19–4-20
EIM 4-19
green 1-9
orange 1-9
Net-G3A_OM_Book.book Page 3 Thursday, May 14, 2009 8:49 AM