Topcon Paver System 5 - Page 198

Topcon Paver System Five Operator’s Manual
Index
D
Deadband elevation 4-27
Deadband slope 4-29
Default settings 4-16
E
Elevated stringline
and grade stakes 3-9
setting 3-5–3-9
Elevation
See Screed elevation
Elevation mode
4-11
LED 4-11
Elevation reference
set in control box
4-7
Elevation setup 5-7–5-10
F
Factory settings 4-16
G
Gain
elevation 4-20
slope control 4-21
Grade Adjustment Knob 4-4
Grade check 3-12–3-13
Grade checking lath 3-12
Gutter, tracking 6-5
H
Head of material, force M 2-5, 2-7
I
Indicate button 4-12
Indicate mode 4-12
See also Manual mode
J
Jog button
lower
4-14
lower cylinder 4-14
maximize travel 5-3
raise 4-14
raise cylinder 4-14
Joint match 3-2, 6-5
L
Laser control
above grade
2-24
below grade 2-25
on-grade 2-24
receiver 2-24
transmitter 2-24
Laser tracker 1-7
L-bar 6-3–6-5
and SAS 6-14
and screed extension 6-4
mounting on tow arm 6-14
position 6-3
tracking with 6-3
using w/ ski 6-14
LED 4-16
auto mode 4-13
control box menus 4-16
display 4-3
for bail 2-23
function indicators 4-6
grade adjustment 4-5
indications 4-5
light sensor 4-2
Lower cylinder w/ jog button 4-14
M
Manual mode 4-13
and jog button 4-14
and paving 7-7–7-8
auto/manual button 4-13