21
PREPARATIONS
4 If the instrument body is slightly off level, fine-adjust the height by properly
operating the four adjusters.
Do not extend the adjuster past 1cm.
CONNECTING THE POWER CABLE
1 Make sure that the main switch of the instrument body is OFF.
2 Attach the power cable to the instrument body.
3 Plug the power cable into the 3-plug AC receptacle with grounding.
When the external fixation target (optional accessory) is used, set it on the con-
nector of the chinrest.
WARNING
To avoid fire and electric shock in case of leakage, be sure
to use a power supply equipped with a 3-plug AC recepta-
cle for proper grounding.
CAUTION
To avoid electric shock, do not handle the plugs with wet
fingers.
Adjuster
To Next Page
Loading...
