92
MAINTENANCE
MAINTENANCE
DAILY CHECKUPS
• Dust is a formidable foe to the instrument.
To ensure the production of fine images, care should be taken not to allow fin-
gerprints and/or dirt on the objective lens.
When not in use, be sure to cap the objective lens and cover the instrument
with the dust cover.
Before using the instrument, check if the objective lens is clean. If the objective
lens is stained, clean it following the instructions for "Cleaning the objective
lens" on page 98.
• When not in use, always turn the OFF.
Ordering consumables
• When ordering consumables and spare parts, contact your dealer or TOPCON
(see the back cover) and tell them the article name, article code and quantity.
CAUTION
To prevent the instrument from falling and to avoid injury,
do not install the instrument on an uneven or unsteady
surface, including a slope.
POWER SWITCH
Article name Article code
Illumination lamp 40427 6520
Xenon lamp 40443 6570
Chinrest tissue paper 40310 4082
Dust cover 40533 9103
Article name Article code
Fuse T-5A, 125V (F1, F2) 44691 5006
Fuse T-2.5A, 250V (F1, F2) 44691 5006
Fuse T-0.5A, 250V (F3) 40547 5303
Fuse T-5A, 125V (F4) 44691 5006
Illumination lamp
Xenon lamp
Fuse
Dust cover
Chinrest tissue paper
To Next Page