EasyManua.ls Logo

Topcon TRC-NW200 - Warning Displays and Positions

Topcon TRC-NW200
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
WARNING DISPLAYS AND POSITIONS
To ensure safety, the machine provides warning displays.
Use the instrument correctly by observing the display instructions. If any of the
following display labels are missing, contact your TOPCON dealer at the address
listed on the back cover.
CAUTION
y To avoid injury to the patient's face and hands,
be sure to adjust the height of the chinrest
while directly watching the patient.
CAUTION
y To avoid potential injury during operation,
do not touch the patient's eyes or nose with
the instrument.
WARNING
y Electrical shock can cause burns or a possible fire.
Turn the main power switch OFF and UNPLUG
the power cord before replacing the fuses.
Replace only with fuses of the correct rating.
CAUTION
y To avoid electric shock, be sure to turn
the power supply off and unplug the
power cable before replacing the lamp.
y To avoid burns, do not touch the lamp
immediately after it goes off.
WARNING
y To prevent electrical shock, do not remove
the cover.
There are no user serviceable parts inside,
refer servicing to qualified personnel.
WARNING
y Electrical shock can cause burns or a possible fire.
Turn the main power switch OFF and UNPLUG
the power cord before replacing the fuses.
Replace only with fuses of the correct rating.

Table of Contents

Related product manuals