Topcon TRC-NW200 - Page 70

69
INITIAL SETTING
COUNTER : ON/OFF for the 4-digit calculation counter attached to the ID
number can be selected.
COUNTER MODE : The mode of the 4-digit calculation counter attached to
the ID number can be selected.
COUNTER DATA : The data of the 4-digit calculation counter attached to the
ID number can be set.
The set data is canceled by setting the at the "OFF" (O) posi-
tion.
CODE : The establishment code can be set.
2
COUNTER
ON
OFF
3
COUNTERMODE
NON‑CONTINUATION
CONTINUATION
4
COUNTERDATA
DATA:0001
POWER SWITCH
5
CODE
CODE
CODENo