Toshiba BMS-CT2560U-E - Monitor the Overall Air Conditioning System

Touch Screen Controller Owner's Manual
43
-EN
To check the operation status of the overall air conditioning system, tap / to display the batch ON/OFF screen.
To check the malfunction occurrence status, tap / to display the check code screen.
Monitor the Overall Air Conditioning System
No. Functions
1
Displays the overall number of operating units as ON/OFF meters and numerical values.
2
Displays the number of units for each operation mode. The upper row shows the number of units in operation and the lower row shows
the number of units stopped.
If there is ON/OFF unit, it is displayed in [Other].
3
You can change the operation status of the overall air conditioning system. (P.29)
For the Option settings, see step 3 on (P.32).
4
Tap to close the batch ON/OFF screen.
● NOTE
You can also tap / to close.
5
The check code, check content, notice code, notice content, occurrence location, and occurrence time are displayed.
6
Stop operation of all air conditioners and ON/OFF unit where check codes are displayed and erase the check code (s).
● NOTE
For some ON/OFF unit, only the operation stops, and the check code (s) are not erased.
7
Stop the applicable air conditioner(s) or ON/OFF unit and erase the check code (s).
● NOTE
For some ON/OFF unit, only the operation stops, and the check code (s) are not erased.
8
Tap to close the check code screen.
● NOTE
You can also tap / to close.
6
5
8 43
2
1
7
■ Batch ON/OFF screen ■ Check code history screen