Owner's ManualTouch Screen Controller
93
-EN
Power peak cut
The maximum demand power, which is the power value used
to calculate the electricity fee from the electric power
company.
The monthly electricity fee is composed of the "basic fee" and
the "power fee". The "power fee" is calculated according to
the usage of electricity in the month, but the "basic fee" is
determined according to the month when the Power peak cut
was the highest in the past year. Since the time when Power
peak cut increases, such as summer, is limited, keeping
Power peak cut to the average is a key point to reduce the
basic fee.
During power peak cut control
Control to cut the peak of electric power usage.
Flap
A part that changes the air direction at the outlet. It is also
called a louvre.
ON/OFF unit
Indicates devices that cannot control or monitor the set
temperature or operation mode among the managed
devices.
Main equipment includes lighting settings, air to air heat
exchangers, ventilation fans, etc.
Thermo OFF
An energy saving function whereby when the temperature of
a room reaches the set temperature, the outdoor unit
compressor stops to switch from cooling/heating to fan
operation.
Although the indoor unit (air conditioner) is in operation, the
outdoor unit repeatedly turns ON/OFF depending on the
room temperature.
Refer to the following table for the functional differences
depending on the operation of the main Unit and remote
operation, the level of the operation lock of the main Unit and
the level of the user account.
(
: Full functional operation
: Partially restricted ‒: Cannot be used)
Glossary
List by Lock Level/Level
Item
Unit Operation Remote Operation
Operation
Lock
None
Operation
Lock
- Level 1
Operation
Lock
- Level 2
Admini
strators
Power
Users
Guests
Home screen
List screen
Layout screen
Batch ON/OFF screen
Check Code screen
Group
screen
[CONTROL] tab ‒‒ ‒
[SCHEDULE] tab ‒‒ ‒‒
[GRAPH] tab ‒ ‒
Individual
control
screen
[CONTROL] tab ‒ ‒
[SCHEDULE] tab ‒‒ ‒‒
[GRAPH] tab ‒ ‒
To Next Page
Loading...
