Touch Screen Controller Owner's Manual
86
-EN
10 Power Distribution
In normal houses, a contract is made with the electric power company for each house, but in buildings such as offices and
shops, a contract is made between the building owner and the electric power company, and the building owner pays the total
electricity bill. Therefore, in some cases the building owner distributes the electricity fee that they paid in bulk to each tenant
and invoices for a fee.
With energy report software, you can distribute the electric power based on data such as the operating time of the air
conditioner(s) and the ON/OFF equipment recorded by the Unit. In addition, you can easily summarize the operation results in
a report format and calculate the billing amount.
Example report
This system calculates the distribution of the power by load ratio estimated for each air conditioner. The result may differ from
the actual power consumed. In addition, the result is not calculated based on the Measurement Act and cannot be used officially.
System diagram
Power Distribution System Using the Energy Report Software (PC Software)
Pulse oscillation type watt hour meter
LAN
USB memory stick
Download data for power distribution
PC with Energy Report
Software installed
Power pulse
To Next Page
Loading...
