Toshiba BMS-CT2560U-E - Control air conditioner power; Set saving operation; Release thermo OFF; Configure and confirm the Return Back settings

Touch Screen Controller Owner's Manual
50
-EN
Control air conditioner power
An energy saving function whereby you can operate the air conditioner with suppressed cooling/heating power.
Release (100%): Save Mode is not performed.
Max.(50 - 100%): Operate with the highest save rate.
50: Operate at 50% save rate.
0: Operate at 0% cooling/heating power (Thermo OFF).
● NOTE
Depending on the connected model, it may not be displayed.
Set saving operation
With one of the energy-saving functions, monitor and control the ON or OFF state of the saving operation of the air conditioner.
● NOTE
Depending on the connected model, it may not be displayed.
Release thermo OFF
"Thermo OFF" refers to an energy saving function that controls demand to restrict the cooling/heating power of the air
conditioner such that the outdoor unit compressor is stopped. When this state is reached, the air conditioner becomes a fan
and cold/hot air is no longer output.
To release Thermo OFF, display the settings screen and press [OK].
● NOTE
Depending on the connected model, it may not be displayed.
Configure and confirm the Return Back settings
You can configure and check the Return Back setting temperature and setting time of each operation mode that are set in the
operating schedule.
● NOTE
• Depending on the connected model, it may not be displayed.
• For information on Return Back, see “Return Back settings
” (P.56).
Monitor demand control of outdoor unit
You can monitor the demand rate [%], outdoor line No., and schedule No. of the outdoor unit connected to the selected air
conditioner.
Display the settings screen to check the demand status of the outdoor unit.
● NOTE
Depending on the connected model, it may not be displayed.