Touch Screen Controller Owner's Manual
6
-EN
1 Quick Start Guide
Basic Usage
To start/stop the air conditioner(s)
"Start/Stop Operation" (P.29)
To change the set temperature
"Change the Air Conditioning
Settings" (P.32)
To change the Mode (Cool/Heat/Auto/Dry/Fan)
"Change the Air Conditioning
Settings" (P.32)
To check whether you have forgotten to
turn off the air conditioner(s)
Batch ON/OFF screen
"Monitor the Overall Air
Conditioning System" (P.43)
To check for current malfunctions Check code screen
"Monitor the Overall Air
Conditioning System" (P.43)
Advanced Usage Please use the following functions as necessary.
To set start/stop timer
"Set the Operation Schedule" (P.37)
To configure and confirm the energy
saving settings
Return Back
"Configure and confirm the Return
Back settings" (P.50)
Eco Temperature Shift
"Change to energy saving
temperature" (P.51)
Change Temperature Range
"Set the temperature change range"
(P.51)
Save Mode
"Control air conditioner power" (P.50)
Schedule settings
"Set the Operation Schedule" (P.37)
Power peak cut schedule
"Set demand control schedule of
outdoor unit" (P.65)
To operate the Total Heat Exchange Unit
"Turn ON/OFF the ventilation function"
(P.48)
To cancel the FILTER Sign after filter cleaning
"Erase FILTER Sign" (P.49)
To connect to a PC that has energy
report software installed and display
the energy usage and power usage
report
Connect to a PC that has energy report
software installed and display the
energy usage
"Setting when Using Energy Report
Software" (P.28)
IP Address Setting
"Set the IP address of the Touch
Screen Controller" (P.75)
Output to USB memory
"Output data to a USB memory stick"
(P.68)
Connect to a PC that has energy report
software installed and display the
power usage report
"Power Distribution System Using the
Energy Report Software (PC
Software)" (P.86)
To output the daily and monthly report files, the check code files, and the setup
files by USB
"Output data to a USB memory stick"
(P.68)
To Next Page
Loading...
