52
3-12.Central management address Setting
Using the [Central management address Setting], the central management addresses and setting file of the indoor units can be
configured and changed.
To change the settings, start the service settings using "3-4.How to Start and Stop Service Settings" (P.40).
If you leave the Central management address Setting screen, a restart is required.
Setting and changing central management addresses
1 Tap [1-(1)] of the [Service settings] items
The following message appears: [Rebooting is necessary when it
is executed. Is it OK?]
2 Tap [2-(1)]
Connection information is acquired. (takes a maximum of about
10 minutes)
If the connection information is acquired, the Central management
address Setting screen appears.
3 Using [3-(1)], tap a Central management address to be
configured or changed
The Central management address selection screen appears.
To Next Page
Loading...
