Toshiba BMS-CT2560U-E - Turn ON;OFF the ventilation function; Set ventilation mode; Setting the ventilation fan speed; Check the output status of the air conditioner(s)

Touch Screen Controller Owner's Manual
48
-EN
You can set the ventilation mode of the ventilator connected to the air to air heat exchanger(s) or the air conditioner(s).
The settings screen displayed differs depending on the setting state of [Ventilation → ON/OFF].
When [ON] is selected under [Ventilation → ON/OFF]
Turn ON/OFF the ventilation function
You can turn ON/OFF the operation of the ventilator connected to the air to
air heat exchanger(s) or air conditioner(s).
● NOTE
Depending on the connected model, it may not be configurable.
Set ventilation mode
Bypass: Outdoor air is taken into a room as it is.
Heat exchange: Exchanging heat between the outdoor air and
return air and making the temperature and humidity
of the outdoor air closer to those of the return air
before supplying it.
Automatic: Total Heat Ventilation and Bypass Ventilation are
switched automatically.
● NOTE
Depending on the connected model, some or all items may not be
configurable.
Setting the ventilation fan speed
You can set the ventilation fan speed of the ventilator connected to the air
to air heat exchange unit or the air conditioner. The choices displayed
depend on the model.
● NOTE
• Depending on the connected model, it may not be configurable.
• It is displayed when [Ventilation → ON/OFF] is [ON] and setting change
is possible.
* Details for unbalance settings vary depending on the settings of the
connected model.
Check the output status of the air conditioner(s)
You can check how much power the air conditioner is using for operation.
● NOTE
Depending on the connected model, it may not be displayed.