Toshiba BMS-CT2560U-E - Settings for Remote Monitoring with a PC

30
1-5. Energy Report Software
This software downloads data, such as indoor unit operating time and electric power consumption, from the System Controller,
so the following functions can be used.
• Energy monitor screen: Allows you to use downloaded data to make graphs to visually check comparisons of operating data
and to compare the past data of a specific unit or that of other indoor units, or for separate groups, such as floors or tenants.
• Report screen: Allows you to use the downloaded data to create monthly reports, daily reports, and more.
Function Function outline Note
Trend graph display
Displays a graph of electric power
consumption and operating times of
the air conditioners managed with the
System Controller.
A graph can be displayed for days (in units of one hour),
weeks (in units of one day), months (in units of one day),
and years (in units of one month).
In addition, a no-comparison graph can include outdoor
temperature, indoor temperature, and set temperature.
Air conditioning load graph
display
Displays a graph of the air
conditioning load status of the air
conditioners managed with the
System Controller.
A graph can be displayed for cooling operation, heating
operation, and overall air conditioning load in 11 levels. A
graph can be displayed for days (in units of one hour),
weeks (in units of one day), months (in units of one day),
and years (in units of one month).
Ranking table of air
conditioners
A ranking list can be displayed using
the operating data of indoor units
managed with the System Controller.
You can display comparisons of each
unit or group.
The electric power consumption and operating time can
be compared.
Report output
Creates a report based on the
operating results of each indoor unit
measured by the System Controller.*
Reports can be exported in Excel
®
file format, CSV file
format, or PDF file format.
Billing schedule settings
A billing schedule is a schedule you
can set for when billed prices vary
over multiple time periods or different
days.
Even if a schedule is set, these settings are not reflected
in the System Controller unless the billing schedule is
uploaded. If you create or change a schedule, be sure to
upload it.
Warning history display
You can display the history of
warnings within a specified period.