29
* Each function can be set in [Server/Interface] - [Interface Settings] in the Setting File Creation Software 2.
Input Control
Alarm monitoring
of external
equipment
At ON, displays the associated
external equipment as Alarm
detected status, and at OFF,
displays it as No alarm.
• a contact (ON at signal input, OFF at release)/
b contact (OFF at signal input, ON at release)
Output Control
Air conditioner
alarm output
One or more specified air
conditioners turn ON when an
alarm occurs and turn OFF
when the alarm goes OFF.
• a contact (at ON, signal output, at OFF, output
Stop) fixed
Operation output
One or more specified air
conditioners turn ON when
operating, and turn OFF when
all turn OFF.
• a contact (at ON, signal output, at OFF, output
Stop) fixed
System alarm
output
With this system excluding air
conditioners, it turns ON when
an alarm occurs and turns OFF
when the alarm goes OFF.
• a contact (at ON, signal output, at OFF, output
Stop) fixed
Refrigerant
leakage output
*During normal
operation, do
not set.
Turns ON when a refrigerant
leakage signal is detected and
turns OFF when the detection
stops.
• a contact (at ON, signal output, at OFF, output
Stop) fixed
* During normal operation, do not set.
Operation output
to external
equipment
Turns ON when the associated
external equipment is operated
and turns OFF when stopped.
• a contact (at ON, signal output, at OFF, output
Stop) fixed
Input/Output I / O Function Functions Settings
To Next Page
Loading...
