Toshiba BMS-CT2560U-E - Basic Usage; Start;Stop Operation

34
You can monitor and control the Unit by accessing it from a PC. This section explains the system diagram and the operating
environment. For settings, etc., see "Settings for Remote Monitoring with a PC" (P.32).
● NOTE
Some functions cannot be used from a PC. For details, please see "List by Lock Level/Level" (P.93 in Owner’s Manual).
● NOTE
Up to 16 users can log in at the same time.
Remote Monitoring Using a PC
Log in to Remote Control Software
1 Double-click "AMTC_UI_****" on the desktop
2 Enter [User ID] [password], then click [2-(1)]
User ID/password:
Use the user account set up in step
1 of "Unit settings" (P.32).
The Remote Control Software home screen is displayed.
Log out from Remote Control Software
1 Click
2
-(1)
2
-(1)