MFP ENTRY GUIDE © 2021 Toshiba Tec Corporation All rights reserved
MFP BASIC TECHNOLOGIES
2 - 26
Remarks:
• The above status may differ depending on the models, installed system options and MFP settings.
• Even if transition into the Super Sleep mode is specified, an MFP will enter into the Sleep mode due to other
settings.
[ 3 ] Hibernation
This function allows the equipment to store the last status of the system in the HDD immediately before
the power is turned OFF, and to restart from this stored status at the next boot-up. Depending on the
status at the shutdown, data for the next booting cannot be stored. In such a case, this function does
not operation at the next boot-up and warming up takes longer.
For more details, refer to the Service Manual for each model.
To Next Page
Loading...
