8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 15
EF10 Finisher jam
(Finisher section)
Paper not supported for Saddle Stitch Finisher:
Unsupported paper size, type and an excess
number of pages for stapling are selected. [MJ-
1106/1108]
P. 8-143
EF11 Saddle Stitch Finisher stapling error (front): Front
stapling is not correctly done. [MJ-1106/1108]
P. 8-143
EF12 Saddle Stitch Finisher stapling error (rear): Rear
stapling is not correctly done. [MJ-1106/1108]
P. 8-144
EF13 Saddle paper holder home position detection
abnormality: The paper holder home position
cannot be detected. [MJ-1106/1108]
P. 8-144
EF14 Saddle paper exit jam: Outputting paper is not
completed within a fixed time. [MJ-1106/1108]
P. 8-144
EF15 Saddle Stitch Finisher side alignment motor home
position detection abnormality: The side alignment
motor home position cannot be detected. [MJ-1106/
1108]
P. 8-145
EF16 Saddle Stitch Finisher stacker motor home position
detection abnormality: The stacker motor home
position cannot be detected. [MJ-1106/1108]
P. 8-146
EF17 Saddle Stitch Finisher folding blade home position
detection abnormality: The folding blade home
position cannot be detected. [MJ-1106/1108]
P. 8-146
EF18 Saddle Stitch Finisher additional folding roller home
position detection abnormality: The additional
folding roller home position cannot be detected.
[MJ-1106/1108]
P. 8-147
EF19 Saddle paper folding jam: Fold processed paper
cannot be transported to the additional folding
roller. [MJ-1106/1108]
P. 8-147
EF1A The trailing edge of the paper passed the entrance
path sensor on the Finisher unit transport path.
After the switchback, the paper is transported to the
saddle stitch unit transport path, but does not reach
the saddle stitch entrance path sensor.
-
EF1B Paper remains at the saddle stitch positioning
paper exit sensor for a longer period than specified
while being transported in the pushing/folding
operation. [MJ-1033]
P. 8-148
EF1C Paper is transported in the pushing/folding
operation, but does not reach the saddle stitch exit
path sensor.
P. 8-145
EF20 Saddle stacker jam: Transported paper cannot be
detected in the stacker. [MJ-1106/1108]
P. 8-148
Error code Classification Contents Troubleshooting
To Next Page
Loading...
