Minimum stroke width when
disabled
This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when the automatic stroke adjustment is disabled.
For example, if automatic stroke adjustment is
disabled and the width of fine lines is set to "0" in
the PS command, the width of the lines becomes 1
dot if the value of this code is set to "1"; equally, if it
is set to "2", the width of the lines becomes 2 dots.
1: 1 dot
2: 2 dots
PS/PDF
automatic stroke
adjustment
This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data. If this setting is disabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data)
PS/PDF
automatic stroke
adjustment
Minimum stroke width when
disabled
This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when the automatic stroke adjustment is disabled.
For example, if automatic stroke adjustment is
disabled and the width of fine lines is set to "0" in
the PS command, the width of the lines becomes 1
dot if the value of this code is set to "1"; equally, if it
is set to "2", the width of the lines becomes 2 dots.
1: 1 dot
2: 2 dots
PS/PDF
automatic stroke
adjustment
The larger the value, the darker the fine lines
become.
Line width
minimum value
adjustment
The larger the value, the darker the fine lines
become.
Line width
minimum value
adjustment
The larger the value, the darker the fine lines
become.
Gray (K) lower limit value
Specifies the effective density range of 05-8242
from 0 to 255.
Gray (K) upper limit value
Specifies the effective density range of 05-8242
from 0 to 255.
To Next Page
Loading...
