Toshiba TECRA A11 Series User Manual

Tests and Diagnostics
TECRA A11/S11/P11/Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 3-167
5) Partial read
This subtest reads 1GB data that is in minimum, middle and maximum address of the HDD
area.
6) Write specified address
This subtest writes specified data to a specified cylinder and head on the HDD.
7) Read specified address
This subtest reads data, which has been written to a specified cylinder and head on the HDD.
8) Sequential write
This subtest writes specified 2-byte data to all of the cylinders on the HDD.
9) W-R-C specified address
This subtest writes data to a specified cylinder and head on the HDD, then reads the data and
compares it to the original data.
[ HDC Status ]
An error occurs during the HDD test, the following message is displayed.
Note: For the serial ATA, this message is not displayed correctly.
HDC status = X X X X HDC error register (P – 1f7h)
HDC status register (P – 1f1h)

Toshiba TECRA A11 Series Specifications

General

RAM	Up to 8GB DDR3
Operating System	Windows 7 Professional
Battery Life	Up to 4 hours
Optical Drive	DVD SuperMulti Drive
LAN	Gigabit Ethernet
Processor	Intel Core i3, i5, or i7
Display	15.6-inch HD (1366x768)
Storage	HDD up to 500GB
Graphics	Intel HD Graphics
Wireless	802.11 a/g/n
Webcam	Integrated webcam
Ports	USB 2.0, VGA, RJ-45
Card Reader	SD
Battery	6-cell Li-ion
Dimensions	374 x 250 mm
Chipset	Mobile Intel QM57 Express Chipset