Toshiba TECRA A11 Series User Manual

Tests and Diagnostics
TECRA A11/S11/P11/Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 3-157
3.35.6 Detail of Each Test Function
3.35.6.1 System Test
1) DMI data read
This subtest displays the information in the Flash-ROM in the following format
Model Name ：
XXXXXXXX
Version Number ：
XXXXXXXX
Serial Number ：
XXXXXXXX
Model Number ：
XXXXXXXX
PCN/BND
Number ：
XXXXXXXX
UUID Number ：
XXXXXXXXXXXXXXX
3.35.6.2 Memory test
1) Conventional memory test
This subtest writes a constant data to conventional memory (0 to 640 KB), then reads the
new data and compares the result with the original data.
With regard to the test memory content, save the data to the test memory before the test and
restore it after the test.
Details of Test:
1-1) This subtest performs a test data write/read/compare operation to the work memory
(640KB from 0000:0000 to 9000:FFFF) in the real mode. The test procedure is as follows:
Step 1: Byte Enable Test
Write double words of the data to the initial address of the data in 64KB units and the initial
address + 4, then read the written data byte by byte and compare the result with the original
data.
.

Toshiba TECRA A11 Series Specifications

General

RAM	Up to 8GB DDR3
Operating System	Windows 7 Professional
Battery Life	Up to 4 hours
Optical Drive	DVD SuperMulti Drive
LAN	Gigabit Ethernet
Processor	Intel Core i3, i5, or i7
Display	15.6-inch HD (1366x768)
Storage	HDD up to 500GB
Graphics	Intel HD Graphics
Wireless	802.11 a/g/n
Webcam	Integrated webcam
Ports	USB 2.0, VGA, RJ-45
Card Reader	SD
Battery	6-cell Li-ion
Dimensions	374 x 250 mm
Chipset	Mobile Intel QM57 Express Chipset