Toshiba TECRA A11 Series User Manual

TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-1
4 Replacement Procedures
nits
e.
a guide as to which other FRUs must be removed before a
, the battery pack must also be removed. When repairing
an FRU that is the potential cause of a computer fault, use the chart to determine the order in
which FRUs need to be removed.
4.1 Overview
This chapter describes the procedure for removing and replacing the field replaceable u
(FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace on
The chart below provides
particular FRU can be removed. The numbers in the chart indicate the relevant section
numbers in this manual.
In all cases when removing an FRU
Chart Notation
The chart shows th
for the following exam
e case
ple:
Bluetooth module must be
removed.
 Removing the
Bluetooth module
All FRUs down to the “4.2
Battery pack” to “4.13
Cover assembly/Base
assembly” above the 4.15

Toshiba TECRA A11 Series Specifications

General

RAM	Up to 8GB DDR3
Operating System	Windows 7 Professional
Battery Life	Up to 4 hours
Optical Drive	DVD SuperMulti Drive
LAN	Gigabit Ethernet
Processor	Intel Core i3, i5, or i7
Display	15.6-inch HD (1366x768)
Storage	HDD up to 500GB
Graphics	Intel HD Graphics
Wireless	802.11 a/g/n
Webcam	Integrated webcam
Ports	USB 2.0, VGA, RJ-45
Card Reader	SD
Battery	6-cell Li-ion
Dimensions	374 x 250 mm
Chipset	Mobile Intel QM57 Express Chipset