Toshiba TECRA A11 Series User Manual

Tests and Diagnostics
3-10 [CONFIDENTIAL] TECRA A11/S11/P11/Satellite Pro S500 Series Maintenance Manual (960-784)
3.2 Executing the Diagnostic Test
To start the Repair test program, follow these steps:
1. Insert the Repair test program disk in the USB floppy disk drive or Optical disk drive.
2. Turn on the computer while pressing U key. The following menu appears.
NOTE: The following menu is an example when Repair test program is performed from
the floppy disk.
If the T&D system test program disk for maintenance is started, first, the following KB Type
judging test menu is displayed.
Step 1
The next message screen is displayed.
* Select KB Type
(T: with 10key)]
(O: without 10key)
Enter your KB type? (t/o)
In the case of a keyboard with 10key, the [t] key is pressed. Next, the [Enter] key is pressed.
In the case of a 10-key-less keyboard, it progresses to Step 4.
Step 2
The next message screen is displayed.
* KB type is with 10key... Push (NUMLOCK)(8)key
Check 1: Lighting of NumLock LED of the ten key upper parts is checked.
Check 2: According to a message, the [NumLock] key of a ten key is pressed and then the [8]
keys are pressed.

Toshiba TECRA A11 Series Specifications

General

RAM	Up to 8GB DDR3
Operating System	Windows 7 Professional
Battery Life	Up to 4 hours
Optical Drive	DVD SuperMulti Drive
LAN	Gigabit Ethernet
Processor	Intel Core i3, i5, or i7
Display	15.6-inch HD (1366x768)
Storage	HDD up to 500GB
Graphics	Intel HD Graphics
Wireless	802.11 a/g/n
Webcam	Integrated webcam
Ports	USB 2.0, VGA, RJ-45
Card Reader	SD
Battery	6-cell Li-ion
Dimensions	374 x 250 mm
Chipset	Mobile Intel QM57 Express Chipset