Toshiba TECRA A11 Series User Manual

4-82 [CONFIDENTIAL] TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784)
4.24 MDC/SIM board
Removing the MDC/SIM board
To remove the MDC/SIM board, follow the steps below and refer to Figure 4-44 and 4-45.
1. Disconnect the SIM board FFC from the connector CN9570 on the system
and CN9670 on the SIM board.
board
screw 2 (with SIM board)
2 (without SIM board)
the connector on the MDC.
5. Remove the MDC from the slot.
2. Remove the following screws securing the MDC and SIM board.
 M2.06B BIND
or
 M2.04B BIND screw
3. Remove the SIM board from the slot.
4. Disconnect the RJ11 harness from

Toshiba TECRA A11 Series Specifications

General

RAM	Up to 8GB DDR3
Operating System	Windows 7 Professional
Battery Life	Up to 4 hours
Optical Drive	DVD SuperMulti Drive
LAN	Gigabit Ethernet
Processor	Intel Core i3, i5, or i7
Display	15.6-inch HD (1366x768)
Storage	HDD up to 500GB
Graphics	Intel HD Graphics
Wireless	802.11 a/g/n
Webcam	Integrated webcam
Ports	USB 2.0, VGA, RJ-45
Card Reader	SD
Battery	6-cell Li-ion
Dimensions	374 x 250 mm
Chipset	Mobile Intel QM57 Express Chipset