TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
102
Global Configuration Mode
Example
Specify the maximum number of the connections to the SSH server as 3:
TP-LINK(config)# ssh max-client 3
ssh download
Description
The ssh max-client command is used to download the SSH key file from TFTP
server.
Syntax
ssh download { v1 | v2 } key-file ip-address ip-addr
Parameter
v1 | v2 —— Select the type of SSH key to download, v1 represents SSH-1, v2
represents SSH-2.
key-file —— The name of the key-file which is selected to download. The
length of the name ranges from 1 to 25 characters. The key length of the
downloaded file must be in the range of 256 to 3072 bits.
ip-addr —— The IP address of the TFTP server.
Command Mode
Global Configuration Mode
Example
Download a SSH-1 type key file named ssh-key from TFTP server with the IP
Address 192.168.0.148:
TP-LINK(config)# ssh download v1 ssh-key ip-address 192.168.0.148
show ssh
Description
The show ssh command is used to display the global configuration of SSH.
Syntax
show ssh
Command Mode
Any Configuration Mode
To Next Page
Loading...
