TP-Link TL-SL5428E - Show Igmp Filter-Ip-Addr; Show Igmp Port-Filter

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
169
Syntax
show igmp multi-ip-list
Command Mode
Any Configuration Mode
Example
Display the Multicast IP table:
TP-LINK> show igmp multi-ip-list
show igmp filter-ip-addr
Description
The show igmp filter-ip-addr command is used to display the Multicast Filter
IP-Range table.
Syntax
show igmp filter-ip-addr
Command Mode
Any Configuration Mode
Example
Display the Multicast Filter IP-Range table:
TP-LINK(config)# show igmp filter-ip-addr
show igmp port-filter
Description
The show igmp port-filter command is used to display the configuration of
Multicast Port Filter.
Syntax
show igmp port-filter [port-num]
Parameter
port-num —— The port selected to display the configuration of Multicast Filter,
ranging from 1 to 28. By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example