TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
188
Display the Event configuration of entry 2:
TP-LINK> show snmp-rmon event 2
show snmp-rmon alarm
Description
The show snmp-rmon alarm command is used to display the configuration of
the Alarm Management entry.
Syntax
show snmp-rmon alarm [index]
Parameter
index —— The index number of the entry selected to display the configuration,
ranging from 1 to 12. You can only select one entry for each command. By
default, the configuration of all entries is displayed.
Command Mode
Any Configuration Mode
Example
Display the configuration of all Alarm Management entries:
TP-LINK> show snmp-rmon alarm
To Next Page
Loading...
