TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
30
c-vlan ——Customer VLAN ID, ranging from 1 to 4094.
sp-vlan ——Service Provider VLAN ID, ranging from 1 to 4094.
description ——Give a new description to the VLAN Mapping entry. It is
optional.
Command Mode
Global Configuration Mode
Example
Modify the subsistent VLAN Mapping entry with the C-VLAN 2,and reconfigure
the SP-VLAN as 100:
TP-LINK(config)# vlan-vpn vlan-mapping modify 2 100
vlan-vpn vlan-mapping remove
Description
The vlan-vpn vlan-mapping remove command is used to delete the subsistent
VLAN Mapping entry according to the C-VLAN ID.
Syntax
vlan-vpn vlan-mapping remove c-vlan
Parameter
c-vlan ——Customer VLAN ID, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Delete the subsistent VLAN Mapping entry with the C-VLAN ID 2:
TP-LINK(config)# vlan-vpn vlan-mapping remove 2
vlan-vpn vlan-mapping interface
Description
The vlan-vpn vlan-mapping interface command is used to enable the VLAN
Mapping feature for a specified port. To disable the VLAN Mapping feature of
this port, please use the no vlan-vpn vlan-mapping interface command. By
default, the VLAN Mapping feature of all ports is disabled.
To Next Page
Loading...
