TP-Link TL-SL5428E - Snmp-Rmon Event Owner; Snmp-Rmon Event Enable

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
181
logging the event and sending trap messages to the management station.
Command Mode
Global Configuration Mode
Example
Configure the event type of entries 1,2,3,4 and 8 as log:
TP-LINK(config)# snmp-rmon event type 1-4,8 log
snmp-rmon event owner
Description
The snmp-rmon event owner command is used to configure the owner of
SNMP-RMON Event. To return to the default configuration, please use no
snmp-rmon event owner command.
Syntax
snmp-rmon event owner {index} [owner]
no snmp-rmon event owner {index}
Parameter
index —— The index number of the event entry, ranging from 1 to 12. You can
only select one entry for each command.
owner —— The owner of the event entry, ranging from 1 to 16 characters. By
default, it is minitor.
Command Mode
Global Configuration Mode
Example
Configure the owner of entry 1 as owner1:
TP-LINK(config)# snmp-rmon event owner 1 owner1
snmp-rmon event enable
Description
The snmp-rmon event enable command is used to enable SNMP-RMON
Event entry. To disable the corresponding entry, please use no snmp-rmon
event enable command.
Syntax