TP-Link TL-SL5428E - Show Dhcp-Snooping Interface

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
68
Syntax
show dhcp snooping information
Command Mode
Any Configuration Mode
Example
Display the Option 82 configuration of DHCP Snooping:
TP-LINK(config)# show dhcp-snooping information
show dhcp-snooping interface
Description
The show dhcp-snooping interface command is used to display the interface
configuration of DHCP Snooping.
Syntax
show dhcp snooping interface [Ethernet port-num]
Parameter
port-num ——The number of the switch port. By default, it will display the
configuration of all the ports.
Command Mode
Any Configuration Mode
Example
Display the interface configuration of all the ports:
TP-LINK(config)# show dhcp-snooping interface