TP-Link TL-SL5428E - Show Qos Dot1 P; Show Qos Dscp; Show Qos Scheduler

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
135
show qos dot1p
Description
The show qos dot1p command is used to display the configuration of IEEE
802.1P Priority.
Syntax
show qos dot1p
Command Mode
Any Configuration Mode
Example
Display the configuration of IEEE 802.1P Priority:
TP-LINK# show qos dot1p
show qos dscp
Description
The show qos dscp command is used to display the configuration of DSCP
Priority.
Syntax
show qos dscp
Command Mode
Any Configuration Mode
Example
Display the configuration of DSCP Priority:
TP-LINK# show qos dscp
show qos scheduler
Description
The show qos scheduler command is used to display the schedule rule of the
egress queues.
Syntax
show qos scheduler
Command Mode