TP-Link TL-SL5428E - Acl Holiday; Acl Create

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
140
holiday —— Enable/ Disable Holiday Mode. By default, it is disabled.
Command Mode
Global Configuration Mode
Example
Add a time-range named tSeg1, with time from 8:30 to 12:00 at working day:
TP-LINK(config)# acl time-segment tSeg1 start-time 08:30 end-time 12:00
week-day working-day
acl holiday
Description
The acl holiday command is used to create holiday in Holiday Mode in the acl
time-segment command. To delete the corresponding holiday, please use no
acl holiday command.
Syntax
acl holiday {name} {start-date} {end-date}
no acl holiday {name}
Parameter
name —— The holiday name, ranging from 1 to 16 characters.
start-date —— The start date of the holiday, in the format of MM/DD, for
instance, 05/01.
end-date —— The end date of the holiday, in the format of MM/DD, for
instance, 05/03.
Command Mode
Global Configuration Mode
Example
Define National Day, configuring the start date as October 1st, and the end date
as October 3rd:
TP-LINK(config)# acl holiday NationalDay 10/01 10/03
acl create
Description
The acl create command is used to create ACL. To delete the corresponding