TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
159
show spanning-tree security port-defend
Description
The show spanning-tree security port-defend command is used to display
the Port Protect configuration of Spanning Tree.
Syntax
show spanning-tree security port-defend [port]
Parameter
port —— The port selected to display the configuration, ranging from 1 to 28.
By default, the Port Protect configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the Port Protect configuration of port 2:
TP-LINK(config)# show spanning-tree security port-defend 2
To Next Page
Loading...
