TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
119
show system-info
Description
The show system-info command is used to display System Description,
Device Name, Device Location, System Contact, Hardware Version, Firmware
Version, System Time, Run Time and so on.
Syntax
show system-info
Command Mode
Any Configuration Mode
Example
Display the system information:
TP-LINK# show system-info
show ip address
Description
The show ip address command is used to display MAC Address, IP Address,
Subnet Mask and Default Gateway of the system, whether the DHCP Client
function is enabled or not and some other information.
Syntax
show ip address
Command Mode
Any Configuration Mode
Example
Display the IP Address of the system
TP-LINK# show ip address
To Next Page
Loading...
