TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
34
Chapter 7 Voice VLAN Commands
Voice VLANs are configured specially for voice data stream. By configuring Voice VLANs and
adding the ports with voice devices attached to voice VLANs, you can perform QoS-related
configuration for voice data, ensuring the transmission priority of voice data stream and voice
quality.
voice-vlan enable
Description
The voice-vlan enable command is used to enable Voice VLAN function. To
disable Voice VLAN function, please use no voice-vlan enable command.
Syntax
voice-vlan enable vlan-id
no voice-vlan enable
Parameter
vlan-id —— VLAN ID, ranging from 2 to 4094.
Command Mode
Global Configuration Mode
Example
Enable the Voice VLAN function for VLAN 2:
TP-LINK(config)# voice-vlan enable 2
voice-vlan aging-time
Description
The voice-vlan aging-time command is used to set the aging time for a voice
VLAN. To restore to the default aging time for the Voice VLAN, please use no
voice-vlan aging-time command.
Syntax
voice-vlan aging-time aging-time
no voice-vlan aging-time
To Next Page
Loading...
