TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
23
Command Mode
Global Configuration Mode
Example
Enable the ports 1-3,11-15 for the MAC VLAN feature:
TP-LINK(config)# mac-vlan interface 1-3,11-15
show mac-vlan
Description
The show mac-vlan command is used to display the information of the MAC
VLAN entry .
Syntax
show mac-vlan
Command Mode
Any Configuration Mode
Example
Display the information of the MAC VLAN entry:
TP-LINK(config)# show mac-vlan
show mac-vlan interface
Description
The show mac-vlan interface command is used to display the port state of
MAC VLAN.
Syntax
show mac-vlan interface
Command Mode
Any Configuration Mode
Example
Display the port enable state:
TP-LINK(config)# show mac-vlan interface
To Next Page
Loading...
