TP-Link TL-SL5428E - Show Arp Detection Global; Show Arp Detection Interface

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
72
TP-LINK(config-if)# arp detection recover
show arp detection global
Description
The show arp detection global command is used to display the ARP detection
global configuration including the enable/disable status and the Trusted Port list.
Syntax
show arp detection global
Command Mode
Any Confiuration Mode
Example
Display the ARP detection configuration globally:
TP-LINK(config)# show arp detection global
show arp detection interface
Description
The show arp detection interface command is used to display the interface
configuration of ARP detedtion.
Syntax
show arp detection interface [Ethernet port-num]
Parameter
port-num ——The number of switch port. By default, display the configuration of
all the ports.
Command Mode
Any Configuration Mode
Example
Display the configuration of all the ports:
TP-LINK(config)# show arp detection interface