TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
77
ping-rate ——Specify the transmission rate of the Ping packets when the
Defend Type Ping Flooding is enabled. The options are 128K、256k、512k、1m、
2m、4m in bps. By default, the value is 128k.
syn-rate ——Specify the transmission rate of the SYN/SYN-ACK packets when
the Defend Type SYN/SYN-ACK Flooding is enabled. The options are 128K、
256k、512k、1m、2m、4m in bps. By default, the value is 128k.
Command Mode
Global Configuration Mode
Example
Specify the transmission rate of the Ping packets and the SYN/SYN-ACK
packets as 256K and 1m:
TP-LINK(config)# dos-prevent global 256k 1m
dos-prevent type
Description
The dos-prevent type command is used to select the DoS Defend Type. To
disable the corresponding Defend Type, please use no dos-prevent type
command.
Syntax
dos-prevent type [land] [scan-synfin] [xma-scan] [null-scan] [port-less -1024]
[smurf] [blat] [ping-flood] [syn-flood] [win-nuke]
no dos-prevent type [land] [scan-synfin] [xma-scan] [null-scan] [port-less -1024]
[smurf] [blat] [ping-flood] [syn-flood]
Parameter
land —— Land attack.
scan-synfin —— Scan SYNFIN attack.
xma-scan —— Xma Scan attack.
null-scan —— NULL Scan attack.
port-less-than-1024 ——The SYN packets whose Source Port less than 1024.
smurf —— Smurf attack.
blat —— Blat attack.
ping-flood —— Ping flooding attack.
To Next Page
Loading...
