TP-Link TL-SL5428E - User Access-Control Disable; User Access-Control Ip-Based

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
54
Global Configuration Mode
Example
Modify the password of tplink as newpwd:
TP-LINK(config)# user modify password tplink password newpwd newpwd
user access-control disable
Description
The user access-control disable command is used to cancel the user
access-control.
Syntax
user access-control disable
Command Mode
Global Configuration Mode
Example
Cancel the user access-control:
TP-LINK(config)# user access-control disable
user access-control ip-based
Description
The user access-control ip-based command is used to limit the IP-range of
the users for login. Only the current host and the users within the IP-range you
set here are allowed for login.
Syntax
user access-control ip-based ip-addr ip-mask
Parameter
ip-addr —— The source IP address.
ip-mask —— The IP mask address.
Command Mode
Global Configuration Mode