TP-Link TL-SL5428E - Show Vlan-Vpn Vlan-Mapping Interface

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
33
Any Configuration Mode
Example
Display the information of VLAN Mapping entry:
TP-LINK(config)# show vlan-vpn vlan-mapping
show vlan-vpn vlan-mapping interface
Description
The show vlan-vpn vlan-mapping interface command is used to display the
VLAN Mapping port enable state. port state of VLAN Mapping
Syntax
show vlan-vpn vlan-mapping interface
Command Mode
Any Configuration Mode
Example
Display the VLAN Mapping port enable state:
TP-LINK(config)# show vlan-vpn vlan-mapping interface