TP-Link TL-SL5428E - Show Snmp View; Show Snmp Group

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
185
The show snmp global-config command is used to display SNMP
configuration globally.
Syntax
show snmp global-config
Command Mode
Any Configuration Mode
Example
Display SNMP configuration globally:
TP-LINK> show snmp global-config
show snmp view
Description
The show snmp view command is used to display the View table.
Syntax
show snmp view
Command Mode
Any Configuration Mode
Example
Display the View table:
TP-LINK> show snmp view
show snmp group
Description
The show snmp group command is used to display the Group table.
Syntax
show snmp group
Command Mode
Any Configuration Mode
Example
Display the Group table:
TP-LINK> show snmp group