TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
29
Command Mode
Global Configuration Mode
Example
Configure Global TPID of the VLAN-VPN as 8200:
TP-LINK(config)# vlan-vpn tpid 8200
vlan-vpn vlan-mapping add
Description
The vlan-vpn vlan-mapping add command is used to add the VLAN Mapping
entry,
Syntax
vlan-vpn vlan-mapping add c-vlan sp-vlan [description]
Parameter
c-vlan —— Customer VLAN ID, ranging from 1 to 4094.
sp-vlan —— Service Provider VLAN ID, ranging from 1 to 4094.
description —— Give a description to the VLAN Mapping entry . It is optional.
Command Mode
Global Configuration Mode
Example
Add a VLAN Mapping entry with the C-VLAN being 2 and the SP-VLAN being
200:
TP-LINK(config)# vlan-vpn vlan-mapping add 2 200
vlan-vpn vlan-mapping modify
Description
The vlan-vpn vlan-mapping modify command is used to modify the subsistent
VLAN Mapping entry,
Syntax
vlan-vpn vlan-mapping modify c-vlan sp-vlan [description]
Parameter
To Next Page
Loading...
