TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
111
Any Configuration Mode
Example
Display the information of all Address entries:
TP-LINK(config)# show bridge address all
show bridge aging-time
Description
The show bridge aging-time command is used to display the Aging Time of
the MAC address.
Syntax
show bridge aging-time
Command Mode
Any Configuration Mode
Example
Display the Aging Time of the MAC address:
TP-LINK(config)# show bridge aging-time
To Next Page
Loading...
