TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
116
ip-addr —— IP Address of the TFTP server.
Command Mode
Privileged EXEC Mode
Example
Download the configuration file to the switch by TFTP server with the IP
192.168.0.148 and name this file config.cfg:
TP-LINK# user-config load filename config.cfg ip-address 192.168.0.148
user-config save
Description
The user-config save command is used to save current settings.
Syntax
user-config save
Command Mode
Privileged EXEC Mode
Example
Save current settings:
TP-LINK# user-config save
firmware upgrade
Description
The firmware upgrade command is used to upgrade the switch system via the
TFTP server.
Syntax
firmware upgrade filename name ip-address ip-addr
Parameter
name —— Specify the name for the Firmware File.
ip-addr —— IP Address of the TFTP server.
Command Mode
Privileged EXEC Mode
To Next Page
Loading...
