TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
42
Example
Display the global GVRP status:
TP-LINK(config)# show gvrp global
show gvrp interface
Description
The show gvrp interface command is used to display the GVRP configuration
information of the specified Ethernet ports.
Syntax
show gvrp interface [Ethernet port-num]
Parameter
port-num ——The Ethernet port number. By default, the GVRP configuration
information of all the Ethernet ports isdisplayed.
Command Mode
Any Configuration Mode
Example
Display the GVRP configuration information of all the Ethernet ports:
TP-LINK(config)# show gvrp interface
To Next Page
Loading...
