10.4-3 Switch > MVR > Group Information
The section describes user could display the MVR Groups detail information on the switch. Entries in
the MVR Group Table are shown on this page. The MVR Group Table is sorted first by VLAN ID, and
then by group.
Navigating the MVR Channels (Groups) Information Table
Each page shows entries from the MVR Group table, default being 10, selected through the "entries
per page" input field. When first visited, the web page will show the first 10 entries from the beginning
of the MVR Channels (Groups) Information Table.
The "Search" input fields let you select the starting point in the MVR Channels (Groups) Information
Table. It will update the displayed table starting from that or the closest next MVR Channels (Groups)
Information Table match.
MVR Groups parameters:
VLAN ID: Displays the VID (VLAN ID) of the group.
Group: Displays the Group ID of the group displayed.
Port Members: Indicates which ports are members (the Ports under this group).
Buttons
Show entries: You can choose how many items you want to show up.
Search: You can search for the information that you want to see.
Auto-refresh: Check to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
Previous: Updates the system log entries, turn to the previous page.
Next: Updates the system log entries, turn to the next page.
To Next Page
Loading...