10.4-4 Switch > MVR > SFM Information
The MVR SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific
Multicast) information. This table is sorted first by VLAN ID, then by group, and then by Port. Different
source addresses belong to the same group are treated as single entry.
Navigating the MVR SFM Information Table
Each page shows up to many entries from the MVR SFM Information table, default being 10, selected
through the "entries per page" input field. When first visited, the web page will show the first 10 entries
from the beginning of the MVR SFM Information Table.
The "Search" input fields lets you select the starting point in the MVR SFM Information Table. It will
update the displayed table starting from that or the closest next MVR SFM Information Table match.
MVR SFM parameters:
VLAN ID: Displays the VID (VLAN ID) of the group.
Group: Displays the Group address of the group displayed.
Port: Indicates which ports are members.
Mode: Displays the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can
be either Include or Exclude.
Source Address: Displays the IP Address of the source. Currently, system limits the total number of IP
source addresses for filtering to be 128. When there is not any source filtering address, the text "None"
is shown in the Source Address field.
Type: Displays the type (either Allow or Deny).
Hardware Filter/Switch: Indicates whether data plane destined to the specific group address from the
source IPv4/IPv6 address could be handled by chip.
Buttons
Show entries: You can choose how many items you want to show up.
Search: You can search for the information that you want to see.
Auto-refresh: Check to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
Previous: Updates the system log entries, turn to the previous page.
Next: Updates the system log entries, turn to the next page.
To Next Page
Loading...