Transition Networks SM8TAT2SA - Page 165

12-4.2 VLAN Configuration
The Security > ARP Inspection > VLAN Configuration page displays the VLAN Mode Configuration
table.
Parameters:
Add New Entry: Click the button to add a row for configuring.
VLAN ID: The VID for this instance.
Log Type: Select None, Deny, Permit, or All. The default is None.
Apply: Click the Apply button when done configuring.
12-4.3 Static Table
Navigate to the Security > ARP Inspection > Static Table menu path to display the Static ARP Inspection
Tab l e :
Parameters:
Add New Entry: Click the button to add a row for configuring.
Port: Select the port being configured.
VLAN ID: The VID for this instance.
MAC Address: Enter the MAC address for the entry. Must be a valid unicast MAC address.
IP Address: Enter the IP address for the entry.
Apply: Click the Apply button when done configuring.